How To Bypass Dryer Start Switch

What is a Dryer Start Switch?

A dryer start switch is a component of the dryer that initiates the dryer’s motor to begin spinning. When you press the start button on your dryer, the start switch sends an electrical signal to the motor to start spinning. If the start switch is faulty, the dryer won’t start, and you’ll need to bypass it to get it working again.

How to Bypass Dryer Start Switch

To bypass the dryer start switch, you’ll need to follow these steps: 1. Unplug your dryer from the power outlet to ensure your safety. 2. Locate the dryer start switch. It’s usually located on the control panel of the dryer. 3. Remove the control panel cover to access the dryer start switch. 4. Disconnect the wires from the dryer start switch by pulling them off gently. 5. Use a wire stripper to strip the ends of the wires that were connected to the dryer start switch. 6. Connect the wires together by twisting them together tightly. 7. Use electrical tape to cover the wires where they were twisted together. 8. Replace the control panel cover. 9. Plug your dryer back into the power outlet. 10. Turn on your dryer to test if it’s working. If it starts, you’ve successfully bypassed the dryer start switch.

FAQs about How to Bypass Dryer Start Switch

Q: Why would I need to bypass my dryer start switch?

A: You would need to bypass your dryer start switch if your dryer is not starting, and you suspect that the start switch is faulty.

Q: Is it safe to bypass the dryer start switch?

A: Yes, it’s safe to bypass the dryer start switch as long as you’ve unplugged your dryer from the power outlet before beginning the process.

Q: Can I use my dryer without a start switch?

A: No, you cannot use your dryer without a start switch. The start switch is essential for initiating the motor to start spinning.

Q: What if bypassing the dryer start switch doesn’t work?

A: If bypassing the dryer start switch doesn’t work, it’s possible that the issue lies with another component of the dryer, such as the motor or the thermal fuse.

Conclusion

Bypassing the dryer start switch is a simple process that can help you determine whether the issue with your dryer lies with the start switch or another component. By following the steps outlined in this article, you’ll be able to bypass the dryer start switch and get your dryer working again. Remember to always unplug your dryer from the power outlet before attempting any repairs.