How To Bypass The Neutral Safety Switch

What is the Neutral Safety Switch?

The neutral safety switch is a device that is usually located on the transmission shift lever. It is designed to prevent the engine from starting unless the transmission is in neutral or park. This is to prevent the car from accidentally starting in gear, which could be dangerous. The switch is also designed to prevent the car from being started without the key in the ignition.

Why Bypass the Neutral Safety Switch?

There are a few reasons why you might want to bypass the neutral safety switch. One reason could be that the switch is faulty or malfunctioning, and is preventing the car from starting even when the transmission is in neutral or park. Another reason could be that you are installing a remote starter or an aftermarket alarm system, and need to bypass the switch to make these systems work.

How to Bypass the Neutral Safety Switch

There are a few different methods for bypassing the neutral safety switch, depending on the make and model of your vehicle. Here are some general steps that you can follow:

Method 1: Jump the Switch

One way to bypass the neutral safety switch is to jump the switch using a jumper wire. Here’s how: 1. Locate the neutral safety switch on your vehicle. It is usually located on the transmission shift lever. 2. Disconnect the wiring harness from the switch. 3. Connect a jumper wire between the two terminals on the wiring harness. 4. Turn the ignition key to the “on” position and try to start the engine.

Method 2: Replace the Switch

Another way to bypass the neutral safety switch is to replace the switch with a new one. Here’s how: 1. Locate the neutral safety switch on your vehicle. It is usually located on the transmission shift lever. 2. Disconnect the wiring harness from the switch. 3. Remove the old switch from the transmission shift lever. 4. Install the new switch onto the transmission shift lever. 5. Reconnect the wiring harness to the new switch. 6. Turn the ignition key to the “on” position and try to start the engine.

Method 3: Disable the Switch

A third way to bypass the neutral safety switch is to disable the switch altogether. Here’s how: 1. Locate the neutral safety switch on your vehicle. It is usually located on the transmission shift lever. 2. Disconnect the wiring harness from the switch. 3. Cut the wires leading to the switch. 4. Connect the two wires together using a wire connector or electrical tape. 5. Turn the ignition key to the “on” position and try to start the engine.

FAQs

Q: Is it legal to bypass the neutral safety switch?

A: Bypassing the neutral safety switch is not recommended and may be illegal in some states. It is important to check with your state’s laws and regulations before attempting to bypass the switch.

Q: Can bypassing the neutral safety switch damage my vehicle?

A: Bypassing the neutral safety switch can potentially damage your vehicle if not done correctly. It is important to follow the proper steps and procedures when bypassing the switch to avoid any damage.

Q: Can I bypass the neutral safety switch on any vehicle?

A: The method for bypassing the neutral safety switch may vary depending on the make and model of your vehicle. It is important to consult your vehicle’s owner’s manual or a professional mechanic before attempting to bypass the switch.

Conclusion

Bypassing the neutral safety switch can be a useful solution for starting your vehicle when the switch is faulty or malfunctioning. However, it is important to follow the proper steps and procedures to avoid any damage to your vehicle. Additionally, it is important to check with your state’s laws and regulations before attempting to bypass the switch.