How To Change The Battery In A Chevy Key Fob

If your Chevy key fob is not working or the range is reduced, then it may be time to change the battery. In this article, we will guide you through the process of changing the battery in a Chevy key fob. Follow the steps below to get started.

Gather the Necessary Tools

Before you begin, you will need a few tools to make the process easier. You will need a small Phillips head screwdriver and a replacement battery. You can find replacement batteries at your local auto parts store or online.

Identify the Key Fob

Identify your Chevy key fob. The battery replacement process may vary depending on the type of key fob you have. Some Chevy key fobs have a flip-out key, while others have a push-button start. Refer to your owner’s manual or consult a mechanic if you are unsure.

Open the Key Fob

Using the small Phillips head screwdriver, carefully pry open the key fob. Be gentle to avoid damaging the key fob or the battery. Some key fobs may have a release button or clip that you can use to open the fob.

Remove the Old Battery

Locate the battery inside the key fob. Carefully remove the old battery, taking note of its orientation. Some key fobs may have a small spring or clip that holds the battery in place.

Insert the New Battery

Insert the new battery into the key fob, ensuring that it is properly aligned with the positive and negative terminals. Some key fobs may have a small diagram indicating the proper orientation of the battery.

Close the Key Fob

Carefully close the key fob, ensuring that all the components are properly aligned. Press the key fob together until you hear a click or feel it snap into place.

Test the Key Fob

Test the key fob to ensure that it is working properly. Press the buttons on the key fob to verify that it is sending signals to your Chevy. If the key fob is not working, then you may need to repeat the battery replacement process or consult a mechanic.

FAQs

What type of battery do I need for my Chevy key fob?

You will need to refer to your owner’s manual or consult a mechanic to determine the type of battery needed for your Chevy key fob. However, most Chevy key fobs use a CR2032 battery.

How often should I replace the battery in my Chevy key fob?

You should replace the battery in your Chevy key fob every 2-3 years or when you notice reduced range or functionality.

What should I do if my Chevy key fob is still not working after replacing the battery?

If your Chevy key fob is still not working after replacing the battery, then you may need to consult a mechanic or dealership for further assistance.

Conclusion

Changing the battery in your Chevy key fob is a simple process that can save you time and money. Follow the steps above to replace the battery and get your key fob working like new. Remember to use the proper tools and refer to your owner’s manual for specific instructions. If you are unsure or have any questions, then consult a mechanic or dealership for assistance.