How To Remove Ray Ban Lenses

If you’re a Ray Ban sunglasses owner, you may eventually need to replace or remove the lenses. Whether it’s due to scratches or you want to switch to a different tint or prescription, knowing how to remove Ray Ban lenses is essential. In this article, we will guide you through the process step by step.

Step 1: Gather the Tools

Before you start removing the lenses, you’ll need to gather a few tools. You will need a microfiber cloth, a screwdriver, a lens suction cup, and replacement lenses if you plan to replace them.

Step 2: Locate the Screw

Turn your Ray Ban sunglasses over to the backside so you can see the screw that holds the lens in place. Use your screwdriver to remove the screw. Keep the screw in a safe place so you don’t lose it.

Step 3: Use the Suction Cup

Once the screw is removed, use the lens suction cup to gently pull the lens away from the frame. Be careful not to apply too much pressure or force, as this may damage the lens or frame.

Step 4: Repeat for the Other Lens

Repeat the process for the other lens. Use the microfiber cloth to clean the frame and lenses before inserting the new lenses.

Step 5: Insert the New Lenses

Insert the new lenses into the frame by gently pressing them into place. Make sure they are secure and aligned properly.


What if I Can’t Find the Screw?

If you can’t find the screw, it’s possible that your Ray Ban sunglasses have a snap-in lens. In this case, you can gently pry the lens away from the frame with your fingers.

Do I Need to Replace Both Lenses?

No, you don’t need to replace both lenses if only one is damaged or needs to be replaced. Simply follow the steps for the specific lens you need to remove.

What if I Don’t Have a Suction Cup?

If you don’t have a suction cup, you can use your fingers to gently pull the lens away from the frame. Just be sure to apply even pressure and be careful not to damage the lens or frame.


Knowing how to remove Ray Ban lenses is a simple process that can save you time and money in the long run. With the right tools and a gentle touch, you can easily replace or remove your Ray Ban lenses as needed. Remember to take your time and be careful during the process to avoid any damage to your sunglasses.